User manual

95.08.23.09.18

Color LaserWriter 12/600 PS Take Apart 3–93

Solenoid Assembly (page 1 of 2)

First Remove the top cover, left cover, rear cover, rear shield plate, and

power supply. Leave the paper pickup block in its out position.

Now 1 Disconnect the solenoid harness cable from J2014 on the mechanical

controller board. Remove the cable from the cable clamp on the printer

chassis. Disconnect the transfer drum cleaner connector from the

transit coupling near the left end of the assembly. Remove the four

silver-colored screws and remove the solenoid assembly from the

printer.

Solenoid Harness

Cable

J2014

Solenoid Assembly

Transit Coupling