User manual

95.08.23.09.17
Color LaserWriter 12/600 PS Take Apart 3–88
Power Supply (page 1 of 2)
First Remove the top cover, left cover, rear cover, and rear shield plate.
Slide the paper pickup block outward as described in step 1 of the
“Paper Pickup Block Removal” topic.
Now 1 Release the tab that secures the black power switch cable cover to the
pickup block side of the chassis wall, (the lower of the two cable covers
in that area). Pull the cable cover away from the chassis and disconnect
the power switch connector from the transit coupling.
Power Supply
Transit Coupling
Cable Cover