User manual

95.08.23.09.17

Color LaserWriter 12/600 PS Take Apart 3–84

Mechanical Controller Board

First Remove the top cover, left cover, rear cover, and rear shield plate.

Note: Perform this procedure only if you are replacing a board. If you

are disassembling the printer to get to a deeper part, see the “Mechan-

ical Controller Mount and Board” topic.

Now Remove the four black screws and all the connectors going into the

board, and remove the board from the printer.

Replacement Note: Connectors J2018, J2020, and J2021 are empty.

Mechanical

Controller Board