User manual

95.08.23.09.17
Color LaserWriter 12/600 PS Take Apart 3–82
DC Controller Board (page 5 of 5)
4 Remove all the remaining connectors and the four silver-colored
screws, and remove the DC controller board from the printer.
Note: J108 and J112 have a clampless socket-style fitting. If you are
removing the board only to get to the laser scanner assembly, do not
disconnect these two connectors. If you are replacing the board, grasp
each edge of the cable and carefully pull straight up to remove the
cable. Reverse the action to reinstall it. The cable at J112 is available
as P/N 922-1344. The cable at J108 is available as P/N 922-1345.
3
1
2
4
DC Controller
Board
J112
J108