User manual
95.08.23.09.17
Color LaserWriter 12/600 PS Take Apart 3–80
DC Controller Board (page 3 of 5)
2 Remove the seven silver-colored screws that secure the I/O board
housing to the chassis. Disconnect connectors J802 and J804 from the
I/O interconnect board and remove the cable from the cable clamp.
Replacement Note: When replacing the I/O board housing, make sure
to thread the ribbon cable through the ferrite guide.
5
4
6
7
1
2
Ferrite
Guide
3
I/O Board
Housing