User manual

95.08.23.09.17

Color LaserWriter 12/600 PS Take Apart 3–67

Fuser Fan (FM1) (page 1 of 2)

First Remove top cover, left cover, rear cover, and rear shield plate.

Now 1 Disconnect J2012 from the mechanical controller board. If you are

simply replacing the fan, release the two ﬂex-type tabs and remove the

fan from the printer. If you are removing the fan to get to a deeper part,

proceed to step 2.

Replacement Note: Install the fan with the vendor label facing out.

J2012

Tab

Fuser Fan