User manual
95.08.23.09.17
Color LaserWriter 12/600 PS Take Apart 3–40
Cassette Pickup Assembly Board (page 4 of 4)
4 Disconnect connectors J302, J303, and J304 and remove the two silver-
colored screws. Carefully remove the board from the pickup block.
Note: Do not disconnect J305 from the pickup assembly board. J305
connects to a small daughterboard on which the photo-reflector for
paper leading-edge sensor PS303 is mounted. This small board is a part
of the cassette pickup assembly board (P/N 922-1311).
Replacement Note: Engage the three claws at the bottom of the board.
J303 J302
2
1
J304
J305