User manual

95.08.23.09.16
Color LaserWriter 12/600 PS Take Apart 3–27
Paper Pickup Block Disassembly (page 5 of 11)
3 The pickup block cover is held in place by two posts at the bottom of
the pickup block and four positioning pins along the top edge of the
block. Shift the pickup block cover upward to clear the positioning
pins, thread the door lever though the opening, and remove the cover
from the pickup block.
Note : The pickup block cover is available as P/N 922-1305. One of
the actuators for door switch SW2 is a part of this cover.
Positioning Pins
Pickup Block Cover
Door Lever