User manual

95.08.23.09.16
Color LaserWriter 12/600 PS Take Apart 3–16
Fuser Oil Extraction (page 1 of 5)
First Remove the fuser access cover, fuser oil bottle, and fuser assembly.
General Description :
Residual oil remains in the fuser assembly after removal of the
assembly from the printer. If you are replacing the fuser assembly, you
must extract this oil with a syringe and then seal the oil reservoir before
returning the assembly to Apple.
Note : One syringe and a sealing block come with the replacement
fuser assembly. The syringe is also available separately as P/N 922-
1549.