User manual

95.08.23.11.30
Color LaserWriter 12/600 PS Basics & Theory 1–114
The printer starts to raise the fuser temperature while it is in the wait
period, and when the temperature reaches the target value the printer
enters the standby state.
Note: If the fuser temperature reaches the target value while image
quality stability control and toner cartridge detection are still in
progress, the printer will not enter the standby state.
If the fuser temperature is 100°C or lower when it starts to rise, the
target temperature is set to a value higher than the normal one. After a
certain period of time, the value is returned to the normal target temper-
ature.
TIME
Fuser
Temperature
WAIT
STANDBY
PRINT
STANDBY
0° C
Target
Temperature