Specifications

Configuring IBM AIX version 3.x
1 Log in as root .
2 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an
IP Address to the Printer,” earlier in this chapter.
3Make sure the printer’s IP name and address are entered in the /etc/hosts file.
4At the UNIX prompt, type the following to run the SMIT utility:
smit
5 To add a remote queue, choose the following items from the SMIT menu:
Print System Management
Add a Print Queue
Remote
Standard Processing
A form appears for you to define a remote printer.
6Enter information into the remote printer form, as follows:
m Name of queue to add Type the local queue name users will use as the name
for the printer.
m
Host name of remote server Typ e th e printer IP name assigned to the printer
as described in “Step 3: Assigning an IP Address to the Printer,” earlier in
this chapter.
m
Name of queue on remote printer Typ e raw
m
Type of print spooler or remote server Select BSD.
7Click Do.
8Click Done.
9Choose Exit from the Exit menu.
67
Setting Up the Printer for UNIX Users