Specifications

3Press the Ins key to display printers in your current context in the NetWare Directory
Services tree.
4Press the Ins key to create a new printer in the NetWare Directory Services tree.
The context listed at the top of the screen should still list the server’s bindery
context that was set earlier. If this is not the case, change the context to the
correct context before creating the printer.
5At the prompt, type the new printer name and press Enter.
6Select the name of the printer you specified in the previous procedure and press Enter.
This will add the printer to the Serviced Printers list of the print server.
Create a print queue from within the printer configuration menu options
1From the Serviced Printers menu list, select the name of the printer you specified in the
previous procedure, and press Enter.
A Printer Configuration menu appears.
2From the Printer Configuration menu, use the arrow keys to highlight Printer type, and
press Enter.
3From the Printer Type menu, use the arrow keys to highlight Other/Unknown, and
press Enter.
This makes your selection active, and brings you back to the Printer
Configuration menu.
4From the Printer Configuration menu, use the arrow keys to highlight Banner type, and
change the banner type from Text to PostScript.
5From the Printer Configuration menu, use the arrow keys to highlight Print queues
assigned, and press Enter.
The Print Queue list appears.
6Press the Ins key to display print queues in your current context in the NetWare
Directory Services tree.
For this example, you will create a new queue.
48
Chapter 3