Specifications

3 Insert a blank floppy disk into the a: drive (or b: drive).
4From the File Manager, open the WIN_OS\WIN31_NT\DISK1 directory on the CD.
5Select Copy from the File menu.
6Type *.* in the Source field and a: (or b: ) in the Destination field.
The files are copied to the floppy disk.
7 Repeat steps 3 through 6 using the WIN31_NT\DISK2 directory.
Installing from the floppy disks
Installing on a Windows 95 computer
1 Find the Windows disks containing the printer software and make sure they’re write-
protected.
Slide up the write-protection tab in one corner of the floppy disk so that you
can see through the hole.
2 Start Windows 95.
Before installing the software, make sure the Windows Control Panel and
Printer folder are closed.
3 Insert LaserWriter Disk 1 for Windows 95 into a floppy disk drive.
Note: If you are installing from disks made from the CD, the floppy disk
labels may be different.
4Click the Start Icon on the Task-Bar and select Run.
5Type a:\setup or b:\setup (depending on which drive holds your installation
disk) in the command line field and click OK.
After a few moments, a message appears warning you to close all other
applications before continuing with this installation.
6Click Next if you have no other open applications.
If you have open applications, click Cancel to stop this installation. Close
all other applications and start the installation process again.
A message appears that lets you view the ReadMe file for late-breaking news.
32
Chapter 3