Specifications

CHAPTER 1
Overview of the AppleVision 1710AV and 1710 Displays
Hardware Overview 7
Figure 1-5 Front panel audio and video controls
There are three groups of controls on the AppleVision 1710AV Display’s front panel. The
AppleVision 1710 Display has two groups of controls.
Both displays have a group of buttons in the upper left corner of the panel. These
buttons perform different functions, depending on whether the display is operating with
a Macintosh computer with AppleVision software, or with a PC-compatible computer.
■
When you are using the display with a Macintosh computer with AppleVision
software installed, pressing any one of the five buttons in the upper left corner of the
panel launches the AppleVision Setup control panel if it is present in the Control
Panels folder.
■
When you are using the display with a PC-compatible computer, the buttons enable
you to select DOS and Windows panels. If you press any one of the buttons, it opens
the on-screen control panels. From these panels you can change the display’s setup.
The first two buttons select among the three main menus: Geometry, Tools, and
Convergence. Geometry is the default that opens up first.
The third (center) button allows you to select among the different topics under each
menu. For example, in the Geometry menu, you can choose Width, Height,
Pincushion, Vertical Shift, Horizontal Shift, or Rotate. In the Tools menu, you can
chose Color Temperature, Overscan, or Scan Rate. (You can only display the scan
rate when you select Scan Rate. You cannot adjust the scan rate, as the display
adjusts to the scan rate coming from the video card.) In the Convergence menu,
select DOS or
Windows panel
Bass volume control
Treble volume control
Microphone on/off
Volume control
Mute button

Power
Sound
Select the
setting
Contrast 
control
Brightness
control
Navigating
buttons
Select one of the
panel functions
Move between
control rows
Open AppleVision Setup or