User`s manual

2Click the Routing button.

3Select a Routing option.

m Computer: Sound is sent directly from the sound input port on the monitor

to the computer’s sound input port. If you want to record from a device

connected to the monitor, select this option.

m Computer and Speakers: Sound is sent to the computer’s sound input port

and to the speakers on the AppleVision monitor. If you set the Sound Input

Port Gain to -10 dB or 0 dB (called Line Level on some AppleVision

monitors), use the monitor’s built-in microphone, or attach a PlainTalk

microphone to the monitor’s sound input port, sound will only be sent to

the computer even if you select this option.

4Click OK to save your settings.

Note: After setting the sound output options, be sure you’ve selected the

sound input device you want to listen to or record from. See “Selecting a

Sound Input Source,” earlier in this chapter.

Sound Settings