User`s manual

The monitor is preadjusted for optimal image quality at common settings. If
you operate the monitor at settings other than those that are preadjusted, you
may need to adjust the image for best results. Refer to Appendix B for a list of
the factory preset timings. Refer to the AppleVision software documentation
for information on adjusting the screen image.
Mac OS–based computers
If you are not sure whether your computer has appropriate built-in video
capability, check with an Apple-authorized dealer or service provider. If your
computer does not have the video capability necessary to use your monitor,
you need to purchase a video card. (Video cards for Mac OS–based computers
are available from an Apple-authorized dealer or service provider.)
Install the video card before you connect the monitor to your computer. To
install a video card in one of the expansion slots inside your computer, see
the manual that came with your computer or video card.
Windows-based computers
Your monitor works with most Windows-based computers equipped with
VGA (Video Graphics Array) or greater capability. You may need to install a
video card to use the monitor with your computer. For more information, see
the manuals that came with your computer.
If you don’t use a preassigned resolution, you’ll need to adjust screen
geometry to match the new resolution. For more information, see “Adjusting
Screen Geometry” in Chapter 4.
9
Setting Up Your Monitor