iMac Manual

iMac (27-inch, Mid 2010) Take Apart — Logic Board 211
2010-09-09
3 Transfer:
• memory (install after
logic board is in
place)
• video card
• optical, HDD, & SSD
data cables
4 Apply new Ethernet
ID label (included in
box with new logic
board) to bottom of
stand.
5 Use the Blank Board
Serializer tool to
set computer’s serial
number on new logic
board.
6 Note: You can install
the logic board with
the computer
positioned as shown
or with the computer
standing upright.
Important: Make
sure the memory
modules are removed
for installation and
no cables are trapped
between the logic
board and rear
housing.