iMac Manual
iMac (27-inch, Mid 2010) Take Apart — General Information 127
2010-09-09
Cleaning & Handling the Glass Panel
Follow the cleaning procedures in this manual to ensure the glass panel is free of dust and
other particles before returning the computer to the customer.
• The glass panel is not tempered and will break into sharp pieces of mishandled.
A scratched or broken glass panel is not covered under warranty.
• Removing the glass panel requires special tools such as lint-free gloves, rubber suction cups,
and microfoam storage bags.
• To prevent contamination, wear lint-free gloves and handle the glass only by the edges.
Do’s and Don’ts
DO
• Handle glass panel using lint-free gloves.
• Use only a sticky silicone roller to clean the inside surface of the glass and the LCD panel.
• Place the glass panel into a clean protective microfoam bag when removed from the unit.
• Store the glass panel in a safe area where it will not be broken or damaged.
• Store the LCD panel in an anti-static bag to prevent the buildup of static charges which may
attract dust particles to the display’s surface.
• Store the silicone roller and sticky paper within a temperature range of 39-104 F (5-40 C).
• If the silicone roller is no longer tacky, wash it in warm soapy water or wipe with isopropyl
alcohol. If the tackiness does not return, replace the silicone roller.
DON’T
• Touch the inside of the glass with bare hands or dirty gloves. Fingerprints will be dicult to
remove.
• Place the glass panel onto a work surface where it may collect dust and other contaminants
unless it has rst been placed into a protective microfoam bag.