Operation Manual

• In the tool strip, choose Noise Reduction from the Quick Brush pop-up menu (with a
brush icon).
The Noise Reduction Brush HUD appears, and the Noise Reduction adjustment controls
appear in the Adjustments inspector and the Adjustments pane of the Inspector HUD, if
both are shown.
3 Specify the brush stroke settings using the controls in the Noise Reduction Brush HUD.
For more information about the controls in the Brush HUD, see Controls in the Brush
HUD. For more information about applying brush strokes to an image, see Working with
Brushes.
4 Brush the adjustment on the area of the image where you want to reduce the digital
noise.
The digital noise is removed from the area of the image where the Noise Reduction Quick
Brush adjustment is applied.
To modify the Noise Reduction adjustment after it has been applied to an image
1 Select an image with the Noise Reduction adjustment applied to it.
2 In the Noise Reduction area of the Adjustments inspector or the Adjustments pane of
the Inspector HUD, modify the Noise Reduction adjustment by specifying the following
settings:
• Specify the area over which the Noise Reduction adjustment is applied using the Radius
slider and value slider.
• Specify the amount of edge detail you want to preserve in areas of high contrast using
the Edge Detail slider and value slider.
The previously applied Noise Reduction adjustment is modified.
623Chapter 18 Making Brushed Adjustments