Operation Manual

• In the tool strip, choose Halo Reduction from the Quick Brush pop-up menu (with a
brush icon).
The Halo Reduction Brush HUD appears, and the Halo Reduction adjustment controls
appear in the Adjustments inspector and the Adjustments pane of the Inspector HUD, if
both are shown.
3 Specify the brush stroke settings using the controls in the Halo Reduction Brush HUD.
For more information about the controls in the Brush HUD, see Controls in the Brush
HUD. For more information about applying brush strokes to an image, see Working with
Brushes.
4 Brush the adjustment on the area of the image where you want to remove the halo effect.
The halo effect is removed in the area of the image where the Halo Reduction Quick Brush
adjustment is applied.
Working with the Noise Reduction Quick Brush Controls
You use the Noise Reduction Quick Brush adjustment to remove digital noise in the area
of the image the adjustment is brushed on.
After Noise Reduction
adjustment
Before Noise Reduction
adjustment
To brush the Noise Reduction adjustment on an image
1 Select an image.
2 Do one of the following:
• In the Adjustments inspector or the Adjustments pane of the Inspector HUD, choose
Quick Brushes > Noise Reduction from the Adjustments pop-up menu.
622 Chapter 18 Making Brushed Adjustments