Operation Manual

For more information about the controls in the Brush HUD, see Controls in the Brush
HUD. For more information about applying brush strokes to an image, see Working with
Brushes.
4 Brush the adjustment on the area of the image where you want to change the tint.
The tint is shifted in the area of the image where the Tint Quick Brush adjustment is
applied.
To modify the Tint adjustment after it has been applied to an image
1 Select an image with the Tint adjustment applied to it.
2 In the Tint area of the Adjustments inspector or the Adjustments pane of the Inspector
HUD, modify the Tint adjustment by specifying which way you want to shift the color’s
tint using the Angle slider and value slider.
The previously applied Tint adjustment is modified.
Why Not Use the Enhance Adjustment?
You can always brush the entire Enhance adjustment’s parameter settings in to or out
of an image. However, brushing the Enhance adjustment on an image applies the
Contrast, Definition, Saturation, Vibrancy, and Tint parameter settings. You use the Quick
Brush equivalents when you need to apply each of these adjustments in different ways
to different parts of the photo.
Working with the Contrast Quick Brush Controls
You use the Contrast Quick Brush adjustment to modify the contrast in the area of the
image the adjustment is brushed on.
Before Contrast adjustment After Contrast adjustment
(added contrast to elk and grass)
613Chapter 18 Making Brushed Adjustments