Operation Manual

You use the White Point eyedropper to automatically set the white point in the image.
Before White Point Curves adjustment After White Point Curves adjustment
To set the white point in an image
1 Select an image.
2 If the Curves controls are not shown in the Adjustments inspector or the Adjustments
pane of the Inspector HUD, choose Curves from the Adjustments pop-up menu.
3 Select the White Point eyedropper tool to activate the Loupe.
Click the White Point
eyedropper button
to activate the Loupe.
The pointer changes to an eyedropper, and the Loupe appears, showing a magnified
view of the target area. By default, the Loupe is set to magnify the image to 100 percent
(full size). If necessary, you can increase the magnification of the Loupe by choosing a
larger magnification value from the Loupe pop-up menu. For more information, see
Viewing Images with the Loupe.
550 Chapter 17 Making Image Adjustments