Operation Manual

The left arrow decreases the color temperature of the image, and the right arrow
increases the color temperature.
• Double-click the number in the Temp value slider, then enter a value from 2000 K to
50,000 K and press Return.
Use the Temp slider and value
slider to adjust the color
temperature of the image.
The color temperature of the image is updated as you change the parameter value.
Adjusting Tint with the Tint Controls
You can also manually adjust the tint of an image using the Tint parameter controls. You
use the Tint parameter controls when you need to fine-tune the white balance adjustment
by neutralizing the remaining green or magenta tint.
To manually adjust the tint of your image
1 Select an image.
2 In the White Balance area of the Adjustments inspector or the Adjustments pane of the
Inspector HUD, adjust the Tint parameter by doing one of the following:
• Drag the Tint slider to the left to add a green tint to the image, or drag it to the right
to add a magenta tint.
• Click the left or right arrow in the Tint value slider to change the tint of the image by
single increments, or drag in the value field.
The left arrow adds a green tint to the image, and the right arrow adds a magenta tint.
• Double-click the number in the Tint value slider, then enter a value from –150 to 150
and press Return.
Use the Tint slider and
value slider to adjust
the tint of the image.
The image’s tint is updated as you change the parameter value.
Working with the Exposure Controls
You use the Exposure adjustment controls to set the exposure, recovery, black point, and
brightness values.
507Chapter 17 Making Image Adjustments