Operation Manual

Working with the Flip Controls
You use the Flip adjustment controls when you want to flip the composition of the image
vertically, horizontally, or both.
Before Flip adjustment After Flip adjustment
To flip the composition of an image
1 Select an image.
2 If the Flip controls are not shown in the Adjustments inspector or the Adjustments pane
of the Inspector HUD, choose Flip from the Adjustments pop-up menu.
Choose how you want to flip
the image from the Flip Type
pop-up menu.
3 In the Flip area of the Adjustments inspector or the Adjustments pane of the Inspector
HUD, do one of the following:
• To flip the image horizontally: Choose Horizontal from the Flip Type pop-up menu.
• To flip the image vertically: Choose Vertical from the Flip Type pop-up menu.
• To flip the image both horizontally and vertically: Choose Horizontal and Vertical from
the Flip Type pop-up menu.
Working with the White Balance Controls
You use the White Balance adjustment controls to change the color temperature and
color tint of an image. If an image has pixels that are supposed to be pure white, you can
use the White Balance eyedropper to automatically adjust the color temperature and tint,
or you can adjust the color temperature and tint manually. In most cases, the automatic
adjustment succeeds in removing the color cast from the image. If the White Balance
eyedropper does not completely remove the color cast from the image, you can use the
Temp and Tint adjustment controls to fine-tune the adjustment.
504 Chapter 17 Making Image Adjustments