Operation Manual

Adjusting the Size of Spot & Patch Target Overlays
You can change the size of a Spot & Patch target overlay before and after it’s placed on
an image. It’s best to adjust the size of the target overlay so it fits the area around the
blemish as tightly as possible. A tight fit ensures that any visual aberrations are minimal.
To change the size of the Spot & Patch target before placing it on the image
Do one of the following:
µ
Drag the Radius slider in the Spot & Patch HUD.
µ
Click the left or right arrow in the Radius value slider, or drag in the value field.
µ
Double-click the number in the Radius value slider, then enter a value from 3 to 400 and
press Return.
µ
If you have a mouse with a scroll wheel, rotate the scroll wheel.
The size of the Spot & Patch target changes.
You can also change the size of any Spot & Patch target overlay that you’ve already placed
on an image.
To change the size of an existing Spot & Patch target overlay
1 Display the image at full size (100 percent) by clicking the Zoom Viewer button in the
tool strip or the Full Screen view toolbar (or pressing Z).
2 Click a Spot & Patch target overlay to select it.
A hand icon appears to indicate that you can select the Spot & Patch target overlay rather
than place a new one.
A hand icon appears to
indicate that you can
move the target overlay.
490 Chapter 17 Making Image Adjustments