Operation Manual

• Double-click the number in the Sensitivity value slider, then enter a value from –10.00
to 10.00 and press Return.
Use the Sensitivity slider
and value slider to fine-tune
the area within the Red Eye
target overlay where
desaturation occurs.
The area within the Red Eye target overlay where desaturation occurs increases as the
parameter value increases.
Viewing the Corrected Image Without Red Eye Target Overlays
After correcting the red eyes in your image, you can view the corrected image with the
Red Eye target overlays turned off.
To view the corrected image with the Red Eye target overlays turned off
µ
Select the Selection tool in the tool strip or the Full Screen view toolbar (or press A).
The Red Eye target overlays disappear, but the effect of the Red Eye adjustment remains
visible.
Note: You can still make adjustments to the targeted red eyes with the overlays turned
off, and the image is updated to show the changes.
To turn the Red Eye target overlays on again
Do one of the following:
µ
Select the Red Eye tool in the tool strip or the Full Screen view toolbar (or press E).
µ
In the Red Eye Correction area of the Adjustments inspector or the Adjustments pane of
the Inspector HUD, click the Red Eye Tool button (with an icon of a red eye).
The Red Eye target overlays reappear.
Moving Red Eye Target Overlays
Once placed, a Red Eye target overlay can always be moved.
To move a Red Eye target overlay
1 Make sure the Red Eye tool is selected, then place the Red Eye tool’s target over the Red
Eye target overlay you want to move until the target changes to a hand icon.
483Chapter 17 Making Image Adjustments