Operation Manual

You can also change the size of any Red Eye target overlay that you’ve already placed on
an image.
To change the size of an existing Red Eye target overlay
1 Display the image at full size (100 percent) by clicking the Zoom Viewer button in the
tool strip or the Full Screen view toolbar (or pressing Z).
2 Click the Red Eye target overlay to select it.
A hand icon appears to indicate that you can select the Red Eye target overlay.
The Red Eye tool changes
to a hand icon to indicate
that you can select the
Red Eye target overlay.
3 In the Red Eye Correction area of the Adjustments inspector or the Adjustments pane of
the Inspector HUD, adjust the Radius parameter by doing one of the following:
• Drag the Radius slider.
• Click the left or right arrow in the Radius value slider to change the size of the Red Eye
target overlay by single increments, or drag in the value field.
• Double-click the number in the Radius value slider, then enter a value from 3.00 to
400.00.
Drag the Radius slider
to adjust the size of
the selected Red Eye
target overlay.
The size of the Red Eye target overlay increases as the parameter value increases.
481Chapter 17 Making Image Adjustments