Operation Manual

To replace the adjustments previously applied to an image with an adjustment preset
µ
Hold down the Option key while choosing the adjustment preset from the Presets pop-up
menu at the top of the Adjustments inspector or the Adjustments pane of the Inspector
HUD.
Removing Adjustments from an Adjustment Preset
You can pare down the adjustment parameter settings in an adjustment preset by
removing adjustments from the preset in the Adjustment Presets dialog.
To remove an adjustment from an adjustment preset
1 In the Adjustments inspector or the Adjustments pane of the Inspector HUD, choose Edit
Presets from the Presets pop-up menu.
2 In the Adjustment Presets dialog, select the adjustment preset you want to modify, then
click the Remove (–) button beside the adjustment you want removed from the selected
adjustment preset.
Click the Remove button
to remove an adjustment
from the selected preset.
The adjustment and its parameter values are removed from the adjustment preset.
3 Repeat step 2 until all of the adjustments you want removed from the selected adjustment
preset have been removed, then click OK.
Renaming Adjustment Presets
You can rename an adjustment preset at any time.
447Chapter 16 An Overview of Image Adjustments