Operation Manual

The adjustment parameter settings are saved as an adjustment preset, and the adjustment
preset is now available for use in the Presets pop-up menu in the Adjustments inspector
or the Adjustments pane of the Inspector HUD.
Applying Adjustment Presets
Applying an adjustment preset to an image is as simple as selecting the image and
choosing the adjustment preset from the Presets pop-up menu. When you apply an
adjustment preset to an image, the adjustment controls and parameter values update
to reflect the settings saved in the adjustment preset. If you prefer, you can use an
adjustment preset as a starting point in your image adjustment workflow and then
fine-tune the adjustment after it’s applied to the image.
To apply an adjustment preset to an image
1 Select an image.
2 In the Adjustments inspector or the Adjustments pane of the Inspector HUD, choose the
preset you want to apply to the image from the Presets pop-up menu.
Note: When you place the pointer over an adjustment preset in the Presets pop-up menu,
a preview of the adjustment applied to the image is shown to the right of the highlighted
adjustment preset.
Place the pointer over
an adjustment preset
to preview its effect
on the image.
The adjustment preset is applied to the image. If the image already had some adjustments
applied to it, the adjustment preset is applied in addition to the previous adjustment
settings.
If an image already has adjustments applied to it, you can replace the previously applied
adjustments with the adjustment parameter values saved in the adjustment preset.
446 Chapter 16 An Overview of Image Adjustments