Operation Manual

To switch to Full Screen view
Do one of the following:
µ
Choose View > Full Screen (or press F).
µ
Click the Full Screen button in the toolbar.
To switch back to the Aperture main window
Do one of the following:
µ
Click the Exit Full Screen button in the Full Screen view toolbar.
µ
Press F or the Esc (Escape) key.
In Full Screen view, you have access to all the tools you need to perform adjustments to
your images.
To show the Inspector HUD while in Full Screen view
µ
Press H.
To lock the Inspector HUD to the side of the screen so that it doesn’t overlap the image
µ
Click the Always Show Inspector HUD control in the top-right corner of the HUD.
To access a tool in Full Screen view
µ
Move your pointer to the top of the screen, and in the Full Screen view toolbar that
appears, select a tool.
Toolbar shown at the top
of the screen in Full
Screen view
Always Show Toolbar
control
By default, the toolbar is not shown in Full Screen view until the pointer is moved to the
top of the screen. You can set the toolbar to remain on the screen.
To keep the Full Screen view toolbar on the screen
µ
Move the pointer to the top of the screen in Full Screen view, then click the Always Show
Toolbar control in the toolbar.
Applying Adjustments to a Group of Images
You can apply an adjustment or group of adjustments to a range of images by first
applying the adjustments to one image and then lifting the adjustments from the first
image and stamping them on the other images. You do this by using the Lift and Stamp
tools and the Lift & Stamp HUD.
440 Chapter 16 An Overview of Image Adjustments