Operation Manual

Using Sliders
There are two types of slider controls for changing parameter values—sliders and value
sliders. Slider controls have varying value ranges depending on the parameter.
• Sliders: Drag the slider left or right to set a value, or click anywhere along the slider’s
range to jump directly to that value.
Slider for the
Exposure parameter
Value slider for the
Brightness parameter
• Value sliders: Double-click the value and type a number in the value field, click the left
or right arrow, or drag inside the value field to set a value. Often, you can type a much
larger number in the value field than can be achieved by dragging the standard sliders.
When using value sliders, you can use a modifier key to make value adjustments in
small or large increments.
To change values in small increments
µ
Option-drag in the value field.
To change values in large increments
µ
Shift-drag in the value field.
Resetting Parameter Values
You can reset all of the parameters for an adjustment to their default values.
To reset all parameter values for an adjustment
µ
Click the Reset button to the right of the adjustment name.
Reset button
436 Chapter 16 An Overview of Image Adjustments