Operation Manual

3 Select the correct location in the list that appears below the search field.
The location pin for the location you selected appears in Places view.
You can also search for images with location information assigned to them using the
Smart Settings HUD and the Filter HUD. For more information, see Searching by Place.
Removing Locations
If you have assigned a location to an image or group of images by mistake, you can
remove it.
To remove location information from an image or group of images
1 Do one of the following:
• To remove a location assignment from all images associated with a location: In Places
view, select the location pin.
• To remove a location assignment from a subset of images associated with a location: In
the Browser, select the images whose location information you want to remove.
2 In Places view, choose Remove Locations from the Places Action pop-up menu (with a
gear icon).
If you selected a location pin, the location is removed from all images associated with
the pin. If you selected images in the Browser, the location information is removed from
the selected images.
Note: You can also remove location information from images using the Map pane of the
Metadata inspector. For more information, see Removing Location Information Using the
Metadata Inspector.
Importing and Working with GPS Track File Data
GPS track points are digital bread crumbs that are used to define a path or route (“track”)
using precise coordinates saved by a GPS device or GPS tracking iPhone application. If
you have a GPS-enabled camera or iPhone or another GPS device that you use to create
track files and save waypoints, you can import the track files into Aperture and work with
them in Places view. Each leg and waypoint is displayed in Places view, and you can assign
the legs and waypoints to photos. Photos taken with a GPS-enabled camera or iPhone
are automatically assigned locations corresponding to waypoints in the track file.
Importing GPS Track Files
To begin working with a GPS track file in Places view, you must first import the GPS track
file into Aperture.
To import a GPS track file
1 In the Library inspector, select the project into which you want to import the track file,
then click the Places button in the toolbar.
375Chapter 13 Locating and Organizing Images with Places