Operation Manual

You can also lift RAW Fine Tuning parameter values from one RAW image and stamp
them onto another. RAW Fine Tuning adjustments are included in lift and stamp operations
by default. If you don’t want to lift and stamp RAW Fine Tuning adjustments, you must
deselect them in the Lift & Stamp HUD. For more information about lifting and stamping
adjustments, see Applying Adjustments to a Group of Images. For more information about
the RAW Fine Tuning adjustments, see Working with the RAW Fine Tuning Controls.
Deselect the RAW
Fine Tuning checkbox.
Alternatively, you can use the Lift & Stamp HUD to lift and stamp metadata only.
To exclude everything but metadata from lift and stamp operations
1 Select the image with the metadata or keywords you want to copy.
2 Choose Metadata > Lift Metadata.
The Lift & Stamp HUD appears, showing the metadata and keyword information only.
3 Select an image or group of images, then click the Stamp Selected Images button.
Only the selected metadata and keywords are applied to the image selection.
Applying Keywords Using the Metadata Inspector
When you select an image, you can use the Metadata inspector to see the image’s
keywords and add new keywords, if needed.
To apply keywords using the Metadata inspector
1 Select an image.
2 Choose Window > Show Inspector (or press I), then click Metadata.
3 If necessary, choose Caption & Keywords from the Metadata View pop-up menu.
305Chapter 10 Applying Keywords to Images