Operation Manual

• Unrated, or neutral
• Reject
Rejected images appear with a white X overlay. Positive ratings appear with white star
overlays. If no overlays are displayed on the image, the image is considered neutral or is
not rated. You can rate a single image or apply a rating to several images at once.
Rating Individual Images
You can quickly rate a selected image using the rating buttons in the Metadata inspector
or in the control bar.
To rate an individual image using the rating buttons in the Metadata inspector
1 Select an image.
2 In the Metadata inspector or the Metadata pane of the Inspector HUD, click a rating
button.
Click a rating button
to assign and change
image ratings.
Note: As long as the image is selected, you can change its rating.
To rate an individual image using the rating buttons in the control bar
1 Select an image.
2 To show the control bar, choose Window > Show Control Bar (or press D).
3 Click the rating buttons in the control bar to assign a rating.
Reject
Decrease Rating
Select
Increase Rating
• To assign the highest rating to the image: Click the Select button.
• To assign a rating of Reject: Click the Reject button.
276 Chapter 9 Rating Images