Operation Manual

To close a stack
Do one of the following:
µ
Select an open stack, then choose Stacks > Close Stack (or press Shift-K).
µ
Click the Stack button on the pick image.
Only the pick image
is shown when the stack
is closed.
To close all stacks
µ
Choose Stacks > Close All Stacks, or press Option-Semicolon (;).
To open a stack
Do one of the following:
µ
Select a closed stack, then choose Stacks > Open Stack (or press Shift-K).
µ
Click the Stack button on the pick image.
To open all stacks
µ
Choose Stacks > Open All Stacks, or press Option-Apostrophe (’).
Designating a Pick Image for a Stack
The pick image represents the stack. You can set the image you like best as the pick, or
Aperture can set the pick automatically. When you select and stack images manually in
the Browser, the leftmost image becomes the pick. You can change the pick whenever
you wish.
To set an image as the pick
Do one of the following:
µ
Select an image in the stack, then choose Stacks > Pick, or press Command-Backslash (\).
µ
Drag the image you want into the pick (or leftmost) position in the stack. When you see
a green bar appear, release the mouse button.
268 Chapter 8 Stacking Images and Making Picks