User guide
Chapter 7 Make image adjustments 316
Brush the Dodge adjustment on an image
You use the Dodge Quick Brush adjustment to lighten a specic area of an image. For example,
you could emphasize a subject in the foreground of the image by making it slightly lighter than
the background.
Before Dodge adjustment After Dodge adjustment
(lightened the hills in the foreground)
Selectively lighten an image
1 Select a photo.
2 Do one of the following:
•
In the Adjustments inspector or the Adjustments pane of the Inspector HUD, choose Quick
Brushes > Dodge (Lighten) from the Add Adjustment pop-up menu.
•
In the tool strip, choose Dodge (Lighten) from the Quick Brush pop-up menu .
The Dodge Brush HUD appears, and the Dodge adjustment controls appear in the Adjustments
inspector and the Adjustments pane of the Inspector HUD, if both are shown.
3 Specify the brush stroke settings using the controls in the Dodge Brush HUD.
For more information, see Apply Quick Brush adjustments on page 231 and Work with brush
strokes on page 232.
4 Brush the adjustment on the area of the image you want to lighten.
Modify the Dodge adjustment after it has been applied to an image
1 Select a photo with the Dodge adjustment applied to it.
2 In the Dodge area of the Adjustments inspector or the Adjustments pane of the Inspector HUD,
use the Amount parameter controls to modify the strength of the adjustment.
67% resize factor