User guide

Chapter 7 Make image adjustments 262
1 Select a photo.
2 If you wish, use the Crop tool to place a rough crop on the image.
3 If the Crop controls aren’t shown in the Adjustments inspector or the Adjustments pane of the
Inspector HUD, choose Crop from the Add Adjustment pop-up menu.
4 Use the X and Y value sliders to set the position of the bottom-left corner of the crop overlay
relative to the original photo.
The X and Y values are measured in pixels.
Use the Width and Height
value sliders to adjust the size
of the area within the crop.
The X and Y value sliders
control the position of the
bottom-left corner of the
crop on the original photo.
5 Specify the size of the crop overlay using the Width and Height value sliders.
The width and height values are measured in pixels
6 To apply the crop to the image, press Return.
Flip the composition of an image
You use the Flip adjustment controls when you want to ip the composition of the image
vertically, horizontally, or both.
Before Flip adjustment After Flip adjustment
Flip an image’s composition
1 Select a photo.
2 If the Flip controls are not shown in the Adjustments inspector or the Adjustments pane of the
Inspector HUD, choose Flip from the Add Adjustment pop-up menu.
Choose how you want to flip
the photo from the Flip Type
pop-up menu.
3 Choose an option from the Flip Type pop-up menu:
•
To ip the image horizontally: Choose Horizontal.
•
To ip the image vertically: Choose Vertical.
•
To ip the image both horizontally and vertically: Choose Horizontal and Vertical.
67% resize factor