Specifications

LED Cinema Display (24-inch) Take Apart — Speakers 73
2010-02-08
Removal
Using a black stick, pry 1
the speaker away from
the rear housing.
Caution: Adhesive is
very strong and may
require superhuman
force to remove.
Disconnect cable from 2
logic board.
Replacement
Align speaker with 1
magnet and press to
secure adhesive.
Connect cable to logic 2
board.
Note: Left speaker has
a 4-pin connector and
right speaker has a
3-pin connector.
Note: If you have
trouble reconnecting
cables, unscrew and
ip over logic board
for better access.
Secure cable with tape.3