Specifications

LED Cinema Display (24-inch) Take Apart — All-in-One Cable 71
2010-02-08
Removal
Remove 2 screws: 1
T10, 922-8685
and metal strain relief
support (922-8689)
Loosen or remove tape 2
on cables. Aluminum
tape can be fragile.
Disconnect black cable 3
from the power supply.
Disconnect USB 4
uplink cable from
the logic board.
Pry up ferrite beads 5
with a black stick.
Push the all-in-one 6
cable through the
opening in the rear
housing, feeding
the three cable ends
through the hole one
at a time.
Replacement
Reassembly is an exact
reversal of the steps.