Specifications

LED Cinema Display (24-inch) Take Apart — Glass Panel 48
2010-02-08
Replacement
Remove protective 1
covering from silicone
roller and sticky sheet.
Clean silicone roller 2
by rolling it back and
forth a few times on
sticky sheet.
If sticky sheet looks
dirty, use a new one.
If roller is no longer
tacky, wash it in warm
soapy water.
If tackiness does not
return, replace silicone
roller.
Wearing clean gloves, 3
set display in upright
position to minimize
settling of dust.
Roll silicone roller over 4
LCD panel to remove
any particles.