Specifications

LED Cinema Display (24-inch) Take Apart — General Information 43
2010-02-08
Cleaning Tools Starter Kit
The following tools are oered in the cleaning starter kit (076-1277):
Suction cups, 1 pair
Gloves, lint-free, anti-static, 2 pairs
Sticky silicone roller (6-inch) to clean the glass panel
Sticky sheets to clean the silicone roller, 2 pads
Polishing cloths, clean, anti-static, optical-grade micro-ber “terry style, 5 cloths
Microfoam bag to store the glass panel, 5 bags
ESD bag for LCD panel storage, 5 bags
Cleaning Tool Resources
Note: Apple Retail technicians should refer to standard internal resources for tool ordering.
MCM Portal
http://www.mcmb2b.com/appleasp
LENSPEN: LapTop Pro or VidiMax are very eective in removing ngerprints on LCD and
inside surface of glass.
http://www.lenspen.com/
iKlear Apple Polish
http://www.klearscreen.com/iKlear.aspxl
Brillianize
http://www.brillianize.com/
Cleaning & Handling the Glass Panel
Follow cleaning procedures in this manual to ensure glass panel is free of dust and other
particles before returning unit to customer.
The glass panel is not tempered and will break into sharp pieces of mishandled.
A scratched or broken glass panel is not covered under warranty.
Removing glass panel requires special tools such as lint-free gloves, rubber suction cups,
microfoam storage bags, and iKlear cleaning solution.
To prevent contamination, wear lint-free gloves and handle glass only by edges.
Dos and Don’ts
DO
Handle glass panel using lint-free gloves.
Use only a sticky silicone roller to clean the inside surface of glass and LCD panel.
Use iKlear ONLY on the outside surface of glass panel.
Place glass panel into a clean protective microfoam bag when removed from unit.
Store glass panel in a safe area where it will not be broken or damaged.
Store LCD panel in an anti-static bag to prevent buildup of static charges which may attract
dust particles to display’s surface.
Store silicone roller and sticky paper within a temperature range of 39-104 F (5-40 C).