Specifications

iBook (14.1 LCD 16 VRAM) Additional Procedures -
Chip Standoff Installation Instructions
Chip Standoff Installation
Instructions
The following instructions explain how to install the chip standoff on the logic board in an
iBook computer.
Products Covered
This procedure applies to the following products:
• iBook (16 VRAM)
• iBook (Opaque 16 VRAM)
• iBook (32 VRAM)
• iBook (800 MHz 32 VRAM)
• iBook (900 MHz 32 VRAM)
• iBook (14.1 LCD 16 VRAM)
• iBook (14.1 LCD 32 VRAM)
• iBook (14.1 LCD 900 MHz 32 VRAM)
Tools
• ESD mat and wrist strap
• Chip standoff kit
Electrostatic Discharge (ESD) Precautions
Follow these steps to avoid damage from ESD before working inside the computer.
1. Shut down the computer.
2. Unplug all external cables except the power cord.
3. Touch a metal part of the computer to discharge static electricity.
4. Unplug the power cord.
5. Place the computer on a flat surface, preferably covered by an ESD mat.
6. Put on an ESD wrist strap.
7. To avoid static electricity building back up in your body, do not walk around the room
until after you have finished working and reassembled the computer.