Specifications

iBook (14.1 LCD 16 VRAM) Take Apart -

Keyboard and RAM Shield

14. Install the replacement keyboard, RAM shield, and AirPort Card (if used).

Make sure the replacement keyboard is firmly seated:

• Flip the keyboard back toward the keyboard opening in the case.

• Hold the keyboard at a 45-degree angle above the keyboard opening, and insert

the tabs on the bottom edge of the keyboard into the slot under the edge of the

opening.

•

Important:

Make sure that all the tabs are seated and that the keyboard rests flush

against the edge of the opening.

• Lay the keyboard flat into the keyboard opening.

• Pull down on the keyboard release tabs and then press down on the top portion of

the keyboard to secure it in place.