Specifications

iBook (Dual USB) / iBook (Late 2001) / iBook (14.1 LCD) Keyboard - 7
3. Insert the RAM shield. (Figure 10)
4. Verify that the end of the wire of the wire holder (where it is attached to the RAM
shield, on the keyboard side) does not catch on the side of the compartment. The
screw holes on the shield and computer should align and the shield should lay
uniformly flat.
5. Verify that the AirPort antenna cable routes through the notch in the RAM shield
without pinching.
6. Replace the RAM shield screws.
Figure 10
7. If you do not have an AirPort Card, flip down the wire holder over the AirPort Card
antenna cable and secure it by inserting the prongs of the holder into the slots in the
RAM shield. (Figure 11)
Figure 11