User Manual

ResultFilter
A basic filter for performing simple color correction. While not as
fully featured as the Color Corrector 3-way filter, it’s more likely to
be supported by real-time hardware.
Color Corrector
1
Gives you more precise color control with separate adjustments to
the color balance of the blacks, midtones, and whites of your image.
Color Corrector 3-way
1
Lets you eliminate unwanted color that sometimes appears in the
highlights of an image when you apply one of the color correction
filters.
Desaturate Highlights
1
Lets you eliminate unwanted color that sometimes appears in the
blacks of an image when you apply one of the color correction
filters.
Desaturate Lows
1
Allows you to raise or lower the levels of the highlights, midtones,
and blacks of each channel—red, green, and blue—in RGB color
space individually.
RGB Balance
Allows you to limit illegal RGB values with fine-grained control.RGB Limit
1
1 Works in 32-bit floating point if your sequence is set for high-precision rendering in the Video Processing tab of the
Sequence Settings window.
Distort Filters
The Final Cut Pro Distort filters are design-oriented filters that create texture effects.
ResultFilter
Distorts an image by causing part of it to disappear into the specified
center point, and by bowing the top, bottom, and sides inward. The
more the value of the Amount parameter increases, the more the
sides bow in, and the more of the image at the center point
disappears into it.
Black Hole
This filter distorts an image as if pushed outward, as if something
were “shoving” it from behind. This filter causes rasterization in 3D
groups.
Bulge
Offsets pixels in a clip using the luma of a second selected image,
called the map. Use the Direction and Outset controls to define the
direction and amount of the offset, and the Luma Scale and Repeat
Edge controls to define the appearance of the offset.
Bump Map
Distorts the clip as if it were wrapped around a cylindrical image.
You can adjust the Radius and Center sliders to affect the
appearance of this filter, as well as select or deselect the Vertical
checkbox. The Amount slider controls the effect this filter has on
your image.
Cylinder
Stretches the image outward around a circular region. As the radius
of the warping region increases, the image is warped outward with
a greater amount of distortion. The color of the resulting disk is
determined by the color value of the pixel where the center is
placed.
Disc Warp
1058 Chapter 65 Video Filters Available in Final Cut Pro