Programming instructions

11.06.2013

iPhone is activated will appear.

Select Dismiss.

 If the iPhone does not activate, ensure that the Wi-Fi

network can actually connect to the Internet.

Launch Safari and see if you can browse the web or whether

you are prompted to authenticate with the Wi-Fi network.

The iPhone is activated and ready to use.

NOTE: After the device is activated, you can turn off Wi-Fi

through the Settings Menu..

Depending on the available network coverage, in the upper

left-hand corner, the device will display:

 Boost 1x = 1xRTT coverage

 Boost 3G = 3G EVDO coverage

 Boost LTE = 4G LTE coverage

Recommend the customer set up their voice mail.

Select Phone then Voice Mail and follow instructions.

If the handset does not activate, complete a Hard Reset and guide the customer through Wi-Fi

Activation and Programming again or through Cellular Activation and Programming.