Specifications

REA Program Confirming Printer Operation - 22
Confirming Printer Operation
After completing the two procedures and reassembling the
printer, perform the following steps:
1 Open the top cover and switch on power. After warming
up, the jam light should illuminate. This indicates an
operational DC controller board and top cover actuator
system.
2 Close the top cover. Send a print job to the printer (or
wait for the startup page to print). If the page prints and
exits into the delivery tray, the board and actuator
system are confirmed operational.
3 Connect a computer to the printer and print one page,
using the multipurpose tray as the paper source. If the
page picks up and feeds correctly, the multipurpose
frame assembly is confirmed operational.