Specifications

REA Program Pinch Roller Inspection - 14
also serve to prevent the condition from developing in
functioning units.
Checking Alignment
Remove the cassette and check the alignment of the roller. If
the roller is not aligned fairly evenly across the pinch
surface, make the adjustments described later in this topic.
If the alignment is good, check for clearance.
Checking Clearance
When the cassette is installed, there should be a uniform
clearance of approximately one millimeter between feed
roller and pinch roller.
In practical terms, this can be tested by holding the cassette
in one hand and inserting a business card with the other hand
Checking Clearance