User Guide

121Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
DEFAULT Sets volume to unity level.
Fader Adjusts volume, or duplicates the
V-Pot assignment in Flip mode.
Mackie HUI DSP controls in Logic Pro
The table outlines the DSPcontrols and their assignments.
Note:A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
ASSIGN —
COMPARE Switches DSPdisplay between
“track name/parameter name” and
“parameter name/parameter value”
modes.
BYPASS Switches the bypass state of the
plug-in being edited.
DSP Select 1 to 4
• Assignment Pan mode:
• DSP Select 1 resets pan or
surround angle.
• DSP Select 2 resets surround
diversity.
• DSP Select 3 resets surround LFE
(level).
• DSP Select 4 resets the Spread
parameter.
• Assignment Send mode:
• Activates or deactivates Sends 1
to 4, or mutes 5 to 8.
• Effect Assign mode:
• Confirms Insert 1 to 4 or 5 to
8 effect selection, selects this
Insert slot, and enters Effect Edit
mode, showing the parameters of
the chosen effect.
• Effect Edit mode:
• Sets parameter to the default
value, or turns “switching”
parameters on/off.