User Guide

Bluetooth Operation

NOTE: Bluetooth communication requires a

compatible device running the ION App. Development

of the ION App is ongoing, and any information

presented in this manual about the ION App may

not be up to date. Visit www.AppionTools.com or

your device’s App Store for the latest ION App and

additional information.

1. With the AV760 powered on, press and hold

the “SYNC” button for a few seconds, until the

Bluetooth symbol begins ashing on the AV760

screen.

2. In the ION App, “Scan” for devices, and connect

as shown in the ION App. When using multiple

Appion gauges, it may be easiest to connect all of

the gauges rst, then disconnect if needed.

3. If the connection is lost due to exceeding the

Bluetooth range, or due to loss of power, repeat

Step 1, then “Reconnect” the AV760 through the

ION App interface.

NOTE: Bluetooth range may vary due to obstructions

or interference. The ION App will indicate when

communication is lost.

NOTE: The AV760 will continue to operate normally

even if Bluetooth communication is lost.

Tip: Disable Bluetooth connection on gauge and

disconnect gauges from ION App to save battery life.

AV760 OPERATION MANUAL